Talk Around - AnyTone AT-D878UV Manual De Instrucciones

D- Digital : Set up to digital channel
A+D TX A: Mixed analog, allow receive analog and digital signal, TX is
analog.
D+A TX D: Mixed digital, allow receive analog and digital signal, TX is
digital.
TX Power
(4)
Set up the TX power for current channel.
Offset
(5)
Press /
Band Width
(6)
Only narrow band 12.5KHz for digital channel.
RX Freq
(7)
Input the RX frequency by keypad, click the Menu key to save, press P2
key to return.
TX Freq
(8)
Input the TX frequency by keypad, click the Menu key to save, press [P2]
key to return.

Talk Around

(9)
When the TX radio and RX radio both are set up with Talk Around on, they
can communicate directly without a repeater. The analog channel will use
the RX frequency as TX/RX frequency, the RX CTCSS/DCS decode as TX
CTCSS/DCS encode.
Name
(10)
Allow reset the channel name, this function is only valid in channel mode.
TX Allow
(11)
Always: Always allow transmit
Channel Free: Allow transmit when the channel is free
Different CC: Allow transmit when receive matched signal but different color
code.
Same CC: Allow transmit when receive matched signal and same color code.
TX Prohibit
(12)
TX ON: Will allow transmit on the current channel.
TX OFF: Will not allow transmit on the current channel.
27
7. MAIN MENU FUNCTIONS
to adjust offset frequency.
AT-D878UV Digital DMR and Analog UHF/VHF Two Way Radio