Change Saw Blade - HOLZMANN MASCHINEN KAP 305JL Manual De Instrucciones

15.2

Change saw blade

In the following causes the blade to be changed:
 You need to change to a different type of blade for better cutting result.
 You replace a worn saw blade by a new one
ATTENTION: Use only saw blades with
 max. diameter Ø of 305mm
 max. thickness of 3mm
 25.4 mm inner diameter
 max. RPM of the saw blade must be at least 4200min
 Blade quality HSS or better
To eliminate the risk of cuts you should wear protective
gloves when handling the circular saw blade
CAUTION:
To eliminate the hazard of cutting injury, you should wear safety gloves when touching the saw
blade.
 Swivel the movable circular saw blade guard backwards.
 Turn the locking screw out so far that the safety pin can be pushed past.
If the black guide plate is not easily turn loosen the retainer screw on the left easily.
HOLZMANN Maschinen GmbH
KAP 305JL
A T T E N T I O N
Locking screw
www.holzmann-maschinen.at
-1 .
Securing pins
MAINTENANCE
45