Choosing Positions; Disabling Rain Sensor - Velux KLR 100 Manual Del Usuario

Choosing positions

A product or a Group of products can be set to travel to
a certain position.
The example shows how to set a roller shade to close by
50%.
1
Locate the product in question, see section Locating and
operating a product.
2
Product chosen is displayed. The example shows roller
shade No. 2 (indicated as "Blind").
3
Press and hold key and watch the display. Each black
spot corresponds to the roller shade closing in 10% incre-
ments. Five black spots thus correspond to it closing by
50%.
Release key and the roller shade will travel to the pos-
ition chosen.
Note: A short key pressure will make the roller shade travel
to maximum top or bottom position.
Some decoration and sunscreening products can be
operated in two ways. For instance, a Venetian blind can
be drawn up and down and its slats can be tilted. Once the
product has been located, choose Tilt
the navigation keys .
18 VELUX
Menu
P1
go to position
50% down
or Turn with
ENGLISH

Disabling rain sensor

If the rain sensor gets wet, the skylight operator auto-
matically closes the skylight within 30 seconds.
If you want to open the skylight even if it is raining, you
can disable the rain sensor for up to 60 minutes. When
the rain sensor is disabled, the skylight can open up to
50% of its normal opening distance.
The example shows how skylight No. 1 (indicated as
"Window" in the remote display) is opened even if it is
House
raining.
No. 2
Note: If the rain sensor has been disabled, the skylight will
Blind
not close automatically when the rain sensor gets wet but
Locate
will close automatically after 60 minutes at the earliest
from the time of opening. The skylight will only close
automatically after these 60 minutes if the rain sensor is
P2
wet, or if it is dry, when it gets wet.
1
Locate the skylight (indicated as "Window").
Press to open the skylight.
2
The display shows that the operation cannot be executed
because the skylight operator has been limited by the
rain sensor. You are asked whether the rain sensor is to be
disabled temporarily.
Press "Yes" to disable the rain sensor temporarily.
The rain sensor will now be disabled for 60 minutes.
When the skylight is closed, the rain sensor will be en-
abled again.
If the skylight is set to close automatically, the rain sensor
will only be disabled until the skylight is closed automatic-
ally.
Note: It is recommended to set the skylight to close
automatically to reduce the risk of water to the interior of
the building.
Menu
iNFoRmatioN
rain sensor
temporarily?
Yes
P1
ENGLISH
House
No. 1
Window
Locate
disable
No
P2
VELUX 19