Time And Date; Keypad Lock - Velux KLR 100 Manual Del Usuario

Time and date

Time and date must be set manually the first time the
remote control is to be used. The time and date format
can be set in item 4 by choosing "Set format".
The example shows how to set the time. The date is set
correspondingly by choosing "Date" in item 3.
1
Press "Menu".
2
Scroll through the menus:
user settings time and date
3
Press to highlight "Clock".
Press "Enter" to confirm your choice.
4
Press to highlight "Set time".
Press "Enter" to confirm your choice.
5
Press to set minutes.
Press "Enter" to change to hours.
6
Press to set hours.
Press "Enter" to confirm your settings.
Time is shown automatically when the remote control is
in sleep mode. See section Display.
44 VELUX
Menu
timE aNd datE
Clock
date
Enter
P1
set time
set format
Enter
P1
11:
Enter
P1
11: 0 0 a m
Enter
P1
ENGLISH

Keypad lock

The keypad can be locked so that products cannot be oper-
ated without unlocking the keypad. The stop key
still be used.
House
No. 1
Window
Locate
1
Press
2
Scroll through the menus:
user settings
Back
P2
3
Press
timE
Press
The keypad lock is immediately activated.
Back
P2
sEt timE
Using the keypad even if it is locked:
0 0 a m
Message as shown.
Back
Press
The keypad has temporarily been unlocked.
P2
The keypad will automatically be locked again 20 seconds
after it has been used.
sEt timE
Back
Note: The keypad lock can be deactivated by choosing
"Disable" in item 3.
P2
"Menu".
Keypad lock
to highlight "Enable".
"Enter" to confirm your choice.
"Menu". Press "Locate".
ENGLISH
can
House
No. 1
Window
Menu Locate
P1 P2
KEyPad loCK
disable
Enable
Enter Back
P1 P2
KEyPad loCK
Press
Menu
and then
Locate
Menu Locate
P1 P2
VELUX 45