Power Failure / Mislaid Remote Control; Maintenance - Velux KLR 100 Manual Del Usuario

Power failure / Mislaid remote control

Closing skylights
In case of power failure
The chain can be disengaged by removing
the plug in the center of the bottom sash
and turning the screw, with the provided
2.5 mm hex key, clockwise until it stops.
Note: The chain can be re-engaged by
executing the above procedure in reverse
order.
If the remote control has been mislaid
The sash can be closed by inserting a
pointed object in the operator cover hole
marked A and pressing briefly.
Note: A battery backup unit can be con-
nected. Please contact VELUX for further
information.
70 VELUX
A
ENGLISH

Maintenance

Switch off the main power supply before proceeding!
1
Snow and ice
Remove snow and ice to allow melt water to drain off from
and around the skylight.
2
Cleaning the rain sensor
Dirt on the rain sensor may cause operating problems.
Therefore, it is recommended to clean the rain sensor with
a soft wet cloth once or twice a year or when needed.
B
ENGLISH
VELUX 71