Fitting Of Holder For Remote Control - Velux KLR 100 Manual Del Usuario

Fitting of holder for remote control

The remote control is provided with a wall-mounted
holder, which can be fitted anywhere in your home.
Note: Check that the remote control can operate the
relevant products from the proposed position before it is
fastened to the holder.
1
Fit the back section to the wall with the two screws sup-
plied.
2
Hook the front section onto the back section at the top,
click it into place at the bottom and fix it with a screw.
3
Place the remote control in the holder. It is secured by
means of built-in magnets.
68 VELUX
ENGLISH
If required, the remote control can be fastened with
screws to the holder.
1
Fit the back section to the wall with the two screws sup-
plied.
2
Place the remote control in the front section. Clip the
white strap around the assembled unit. Hook the as-
sembled unit to the back section at the top. Ensure that
the strap fits into the openings in the sides of the back
section. Lock the unit into place at the bottom.
3
Fix the unit with screw at the bottom.
ENGLISH
VELUX 69