Additional Menus On The Monitor; General Configuration; Monitor Settings - Extel WEVPMH 001 Instrucciones De Uso

To enter the "Access management" menu, on the keypad type #8002, administrator code
1- Code No. 1 (4 characters to unlock the access, factory setting "1111")
2- Code No. 2 (4 characters to unlock the access, factory setting "2222") chapter 6 d.
3- Non used
4- Non used
5- Non used
6- Non used
7- Non used
8- Non used
To enter the "Option management" menu, type #8005 on the keypad, administrator code
1- Non used
2- Non used
3- Non used
4- Non used
5- Allows validating the possibility to connect a 2nd or 3rd monitor for a same
dwelling. (Enter the menu, type "0" for an installation without additional monitor,
type "1" for 1 add. monitor, and type "2" for 2 add. monitors).
6- Non used
7- Non used
8- Allows validating or not the activation of the access control in video surveillance
mode (enter the menu, type "0" to deactivate the option, type "1" to activate it)
9- Non used
To enter the "General configuration" menu, type #8009 on the keypad, administrator code
1- To select one of the 15 ring tones of the roadside panel.
2- Non used
3- Non used
4- Allows assigning a name to each monitor for the list which will be visible on the
screen of the roadside panel
5- Non used
6- Non used
7- Non used
8- Select the language of the menus
9- Allows modifying the time outs of monitor lighting system:
- after a call
- in communication
- in visualisation mode (video surveillance)
CFI EXTEL WEVPMH 001 - 03/2010 - V1
14GB
10

ADDITIONAL MENUS ON THE MONITOR

General configuration:
Press twice the ">" key of the monitor. Then select a menu with the +/- and ">" keys to validate
Alarm: non used
Intercom: non used
Configuration:
- allows selecting the ring tone when calling from the roadside panel
- allows selecting the ring tone of an inter communicating call
- non used
- non used
- allows selecting the language of the menu of the monitor (see chapter 7), or
setting the date and the time (see next chapter)
- exit
Exit (Press "-" to validate the exit)
Setting of the time:
Press twice the ">" key, go down to "installation", password: 2414 and validate with the ">" key.
Go down to "Parameterization Ge date/time" (note that the other menus are not used)
Set the time and the date with the +,-,> keys, year/month/day format
Validate with the ">" key

Monitor settings:

Press the "monitor" key and then the "menu" key
Press > to change menu, press +/- to modify the value
- allows selecting the image quality
- allows adjusting the brightness
- allows adjusting the colour
- allows adjusting the ring tone volume of the monitor
CFI EXTEL WEVPMH 001 - 03/2010 - V1
15GB