Preventive Maintenance; Daily Maintenance; Weekly Maintenance - Tomahawk IC2 Manual De Uso

PREVENTIVE
MAINTENANCE
WARNING!
REGULAR MAINTENANCE MUST BE PERFORMED ON THE TOMAHAWK IC2 FOR OPTIMAL
PERFORMANCE AND LONGEVITY.
Please read and follow all instructions below. If the TOMAHAWK IC2 is not maintained as
described, components may wear excessively and the TOMAHAWK IC2 may become damaged.
Improper maintenance will void the warranty terms. If you have questions about maintenance,
contact your local distributor or refer to www.indoorcycling.com
NOTE: MANY MAINTENANCE PROCEDURES REQUIRE LUBRICANT SPRAY.
MANUFACTURER RECOMMENDS FOR EXAMPLE BRUNOX OR A SIMILAR
SOLVENT- AND ACID FREE LUBRICANT.

DAILY MAINTENANCE:

1. Make sure that the TOMAHAWK IC2 is leveled. If the TOMAHAWK IC2 rocks on your floor, turn
the levelling feet underneath the front or rear stabilizer until the rocking motion is eliminated
(see HOW TO MOVE THE TOMAHAWK IC2 on page 13).
2. After each user finishes exercising, the TOMAHAWK IC2 should be disinfected and cleaned
to maintain a hygienic environment. First, apply a disinfectant spray to the handlebars and the
saddle. Using a lint-free cloth, dry the handlebars and the saddle. Next, apply a small amount
of disinfectant to a lint-free cloth and clean the adjustment knobs and the
adjustment handles. Avoid using strong detergents on the TOMAHAWK IC2 frame.

WEEKLY MAINTENANCE:

1. Apply a small amount of the lubrication spray to a lint-free cloth, and thoroughly clean the
frame, the handlebar slider and seat sliders the flywheel and the plastic parts of the
TOMAHAWK IC2.
2. For optimal performance of the resistance
system, and to minimize wear on the brake
pad, the acid-, silicone- and solvent free spray
lubricant should be applied to the brake pad
using the lubrication holes on the plastic
part of the brake pad. If fuzz or lint appears
on the brake pad, the brake pad has become
too dry-lubricant spray should be applied
more frequently. Make sure brake pad is
thoroughly soaked from end to end with
lubricant spray. Then, wipe the excess off.
Version 1.1 2014 IC-TKIC2B-01 Copyright by Indoorcycling Group GmbH 2014 | www.indoorcycling.com