Maintenance And Care - Bodum Bistro Instrucciones De Uso

CONNECTION TO POWER SUPPLY
– After filling the kettle, position it on the base unit (7).
Ensure that the kettle body is seated correctly on the con-
tact unit on the base unit (7).
– Connect the mains plug to the power supply and move the
ON/OFF switch (5) into the ON (I) position.
Note: Ensure that the ON/OFF switch is able to move freely.
SWITCHING OFF
– Your kettle has an automatic ON/OFF switch and will switch
itself off automatically as soon as the water boils.
– You can switch off the kettle at any time by moving the ON/
OFF switch (5) into the OFF (0) position.
Note: The kettle cannot be switched off by hand if the
switch is obstructed for movement, or if the ON/OFF switch is
pressed into the ON (I) position.
POURING OUT WATER
– To remove the kettle from the base unit (7), hold it by its
handle. Ensure that the kettle body remains level while
lifting it from the base unit (7).
– Pour the water from the spout with the lid (1) closed.
Note: Please take care when pouring out water as boiling
water can cause scalds.
SWITCHING THE KETTLE ON AGAIN
– If the kettle was switched off by hand, it can be switched
on again at any time.
– You may switch the kettle on again as soon as the built-
in thermal safety cut-off switch has had sufficient time to
cool.

Maintenance and care

SCALE FILTER
Scale, or calcium, is a natural substance that forms when hard
water is boiled. The filter serves to retain the calcium in the
water kettle.
CLEANING AND REMOVAL OF THE FILTER
It is important to clean the filter regularly. The filter clips into
the body and can be removed by pulling it upwards from the
body. It can be cleaned by gentle brushing with a soft brush
under running water.
79