Symbols; Safety Warnings; Safety Warnings For Bench-Mounted Circular Saws - Festool TKS 80 EBS Manual De Instrucciones

Contents
1 Symbols..................................................... 25
2 Safety warnings.........................................25
3 Intended use..............................................29
4 Technical data........................................... 30
5 Parts of the device.....................................30
6 Set-up/start-up......................................... 30
7 Transportation...........................................32
8 SawStop technology.................................. 32
9 Additional settings/functions.................... 34
10 Working with the electric power tool........39
11 Storage...................................................... 40
12 Service and maintenance..........................40
13 Accessories............................................... 41
14 Environment.............................................. 41
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear a dust mask.
Wear protective gloves.
Wear protective goggles.
Do not remove the sticker.
Direction of rotation of saw and the
saw blade
Wood
Laminated wooden panels
Aluminium, plastic
Adjustment marking for storing the
preset profile setting rail
Handle area
Position markings for sliding table
plastic holders
SawStop technology
254 mm
Ø
Saw blade diameter
Cutting width and standard blade
>2.2 mm
thickness
<1.8 mm
When sawing cutting widths of ≤ 3 mm,
3mm
the SawStop technology is triggered or
the TKS 80 EBS does not start.
The saw blade and cartridge must not
touch!
Electronics with adjustable, constant
speed and temperature monitoring
Electro-dynamic run-down brake
STOP
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
Do not dispose of it with domestic
waste.
Tip or advice
Handling instruction
2

Safety warnings

2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Safety warnings for bench-mounted
circular saws
1) Guarding related warnings
Keep guards in place. Guards must be in
-
working order and be properly mounted. A
guard that is loose, damaged, or is not
functioning correctly must be repaired or
replaced.
Always use saw blade guard, riving knife
-
and anti-kickback device for every
through-cutting operation. For through-
English
25