Technical Data; Parts Of The Device; Set-Up/Start-Up; Setting Up The Tks 80 Ebs - Festool TKS 80 EBS Manual De Instrucciones

English
4

Technical data

Bench-mounted circular saw
Power
TKS 80 EBS 220–240 V
TKS 80 EBS 230 V
TKS 80 EBS 230 V
Speed (no-load)
Locating bore
Cutting height at 90°/45°/47°
Mitre angle
Table dimensions (L x W)
Table height, legs unfolded
Table height, legs folded away
Weight as per EPTA procedure 01:2014
5

Parts of the device

[1-1] Accessory holder
[1-2] Side handle areas
[1-3]
4 V-profiles
[1-4] Spacer wedge for grooving
[1-5]
Table insert
[1-6] Spacer wedge with protective cover
support
[1-7]
Protective cover
[1-8] Safety sticker
[1-9]
Preset profile setting rail
[1-10] Fine adjustment
[1-11] Mitre angle setting
[1-12] Rotary knobs for foldaway legs
[1-13] Scale
[1-14] Cutting height setting
[1-15] Angle indicator
[1-16] Push stick holder
[1-17] Foldaway legs
[1-18] Closing flap
[1-19] Switch panel
[1-20] Transport rollers
[1-21] Shipping protection
30
EU, GB
CH, ZA
DK, AUS
The illustrations specified are located at the be­
ginning and end of the operating instructions.
6

Set-up/start-up

Heavy transport packaging with bench-
mounted circular saw
Risk of injury
► The transport packaging with the bench-
mounted circular saw must be carried and
unpacked by two people.
6.1

Setting up the TKS 80 EBS

Unauthorised voltage or frequency
Risk of accidents
► The mains voltage and the frequency of the
power source must correspond to the
specifications on the name plate.
► Before each use of the power tool, check
the power cable and the mains plug. Any
damage must only be rectified by a special­
ist workshop.
► For use outdoors, only use the approved
extension cable and cable connections.
TKS 80 EBS
1700–3500 min
Dia. 30 mm
0–80 mm/0–56 mm/0–54 mm
690 x 580 mm
CAUTION
WARNING
2200 W
1900 W
2000 W
-1
-2°–47°
900 mm
375 mm
37.0 kg