Beginning Work With The Machine - diversey TASKI swingo 455B Instrucciones Originales De Uso

Dosing:
Warning:
Wear gloves, goggles and appropriate (protective)
working clothes when handling chemical products!
Danger:
Use chemical products recommended by Diversey
only and always observe the product information.
Using unsuitable products (e.g. products containing
chlorine, acids or solvents) may cause harm to health
and severe damage to the machine.
Notice:
For a precise dosage, use the scale in the dosage
cup.
- The filling level mark on the tank corresponds to the
mark in the dosage cup. The type of machine is also
noted in the dosage cup!
Dosing examples:
Information on the package
of the product
0.25% 25 ml for 10l of
water
0.5% 50ml for 10l of
water
• Fill the dosing cup with a suitable product and pour the con-
tent into the fresh water tank. Repeat the procedure until
the required dosing is reached.
• When dosing is finished, the dosing cup will remain in the
tank.
Pre-cleaning
Warning:
Remove any objects (wooden, metal parts etc.)
from the cleaning surface.
The objects could be catapulted by the rotating tool, and
thereby cause injuries to people and damage to the en-
vironment.
64
Tank capacity Product volume
per tank filling
22l 50ml = 0.05l
22l 100ml = 0.1l

Beginning work with the machine

Warning:
Always wear slip-resistant shoes and appropriate
working clothes when working with this machine!
Notice:
Whilst operating the machine always keep both
hands on the steering wheel / driving handle, so
that safe operation is guaranteed.
Warning:
Start familiarization with the machine by making
your first driving attempts in a free area.
Warning:
If there is a danger of falling objects during use of
the machine, the necessary safety precautions
must be taken or adhered to in accordance with na-
tional regulations.
• Lower the squeegee.
• Unlock the foot pedal and lower the
tool slowly.
Manual program start
• Switch the machine on.
• To do this, press the main switch but-
ton (ON/OFF) for 3 seconds.
The display lights up briefly.
• Press the Suction unit ON/OFF but-
ton.
The display lights up; the suction en-
gine starts.
• Press the Cleaning solution supply
ON/OFF button.
The display lights up.
The cleaning solution supply is start-
ed when the brushes rotate.
• Use the quantity control to dose the
cleaning solution.