Securing Child - Joie gemm Manual De Instrucciones

Shoulder Harness Strap
Height Adjustment
see images -
11 14
1. Press the adjustment button at
the front of the seat and pull
the shoulder harnesses to
loosen them.
11
2. At the back of the seat, take
the harness ends off the metal
junction plate.
12
3. Pull the harnesses through the
slots in the seat -1,insert
13
them into the appropriate
set of slots. -2
13
a. Thread the shoulder strap
through shoulder harnesses.
b. Thread the shoulder harness
anchor through the shoulder
harness slot.
c. Thread the shoulder strap
through the shoulder harness
slot.
11
11
12
13
1
2
4. Reassemble the harness ends
onto the junction plate.
14
!
Thread the shoulder strap
through the shoulder
harness anchor. -1
14
!
The shoulder harnesses
must be placed in back of
the two iron tubes.
!
During adjustment, make
sure the shoulder harnesses
are not twisted.
!
Use extreme care in
threading the shoulder
harnesses according to the
figure. If the shoulder
harnesses are not secure,
they will not protect your
baby properly.

Securing Child

Restraint
see images -
15 22
Note
1. Insert is for infant's
protection. Infant weighing
under 10kg must use the
insert A or B.
2. Before using the insert A,
please assemble foam.
3. After child is placed into the
seat, check whether the
shoulder harnesses are at
proper height.
14
1
in the Infant Child
15
15
12