Precautions; Results Of The Tests Carried Out According To Laws; General Precautions - CAMPAGNOLA MA 100 Manual De Uso

2.1

Precautions

WARNING!
The Manufacturer declines all responsibilities, if the precautions below are not taken.
The accomplishments concerning working environment safety and health regulations indicated by the current
laws (2003/10/EC Directive, 2002/44/EC Directive and 81/2008 Law Decree) have to be carried out either by the
employer or by the end-user: supplying the adequate individual protecting devices, informing about working risks,
performing sanitary survey, etc...
The over-exposure to the vibrations may cause neurovascular lesions to people suffering from circulatory disor-
ders. In case of symptoms which could be referred to, such as an over-exposure, a specialist has to be contacted.
These symptoms can be torpor, loss of sensitivity, sharp pains, itch, strength reduction or loss, complexion dis-
coloration or structural modifications. This usually happens in one's hands, wrists and fingers.
2.1.1

Results of the tests carried out according to Laws

WARNING!
Risks due to the operator's contact with the noise and vibrations of the machine or
1. NOISE LEVELContinuous A-weighted sound pressure level at the operator's ear (LpA) and sound power level
of the tool (LwA), both calculated according to the UNI EN ISO 3744 rules:
2. VIBRATIONS LEVEL:
measured in compliance with EN ISO 5349/1-2:
➢
Harvester with 0,5 m fixed length extension pole
➢
Harvester with 1,0 m fixed length extension pole
➢
Harvester with 1,5 m fixed length extension pole
➢
Harvester with 2,0 m fixed length extension pole
➢
Harvester with 2,5 m fixed length extension pole
➢ Harvester with 3,0 m fixed length extension pole
➢
Harvester with aluminium telescopic extension pole 0,70 ÷ 1,00 m
➢ Harvester with aluminium telescopic extension pole 1,25 ÷ 1,95 m
➢
Harvester with aluminium telescopic extension pole 1,85 ÷ 3,15 m
2.2

General precautions

WARNING!
Do not use the tool indoor or in case of potentially explosive
•
The tool is for a professional use only.
•
Use the tool only with the accessories indicated by the Manufacturer.
•
Use the tool only from the ground, working in a stable and safe position.
•
Always use adequate clothing as called for by the job. Wear tight clothing. Do not wear ties, necklaces or belts or keep
loose long hair which may get caught in the moving parts. Use anti-sliding shoes and protective gloves and goggles.
•
Wear a noise-abatement headset.
•
Do not operate, service or repair the equipment if you are under the influence of medicines, alcohol or drugs which could
impair your alertness or coordination.
•
Only well trained and qualified personnel, who have read the use and maintenance manual carefully, are allowed to use
the tool.
•
Keep children and animals away from the tool.
•
Never alter the safety and protective devices.
•
The operator is the only person responsible for injuries caused to other people or for damages caused to their properties.
•
Do not use the tool when you are in unstable position or off balance.
•
It is forbidden to operate the tool on ladders.
•
Before any routine maintenance operations, read the use and maintenance manual carefully. For any maintenance
operation which is not indicated in this manual, please contact one of the Authorised Service Points of the Manufacturer.
• Use the tool just for the purposes indicated in ch. "Product description". Any other kind of use may cause injuries.
•
Store this manual carefully and read it before any tool use.
•
Keep all the stickers with the safety indications in perfect conditions.
•
Avoid working in bad weather conditions, such as fog, heavy rain or strong winds.
•
Keep the rakes (2) and any other moving part away from your face.
Pag. 18
LpA eq = 86 dBA - LwA = 98 dBA
Average weighted hand-transmitted vibration value, in frequency, the user is exposed to,
atmosphere.
Use and Maintenance Manual – Original
Instructions Rev.: 00, Date 21/06/2019
tool.
s
a = 3,90 m/
heq
s
a = 2,54 m/
heq
s
a = 3,90 m/
heq
s
a = 4,30 m/
heq
s
a = 2,00 m/
heq
s
a = 2,08 m/
heq
s
a = 2,30 m/
heq
s
a = 2,33 m/
heq
s
a = 3,85 m/
heq