Boston Acoustics MC200Air Manual Del Propietário página 10

E
N
G
4 Launch a web browser
L
I such as Internet Explorer®,
S
Safari®, Firefox®, etc. Enter
H
http://192.168.1.12
in the address bar.
5 Click on "Profile Configuration".
6 Select the Wi-Fi network you
want to use from the Service Set
ID drop down list. Click Apply. If
your network requires a password
you will need to enter it. Enter
the password carefully – it is case
sensitive.
Tip: If you want to rename the
system you may do this first.
Enter a new name in the "Digital
Media Player Name" box, then click
"Apply".
7 An information box will be displayed - click OK.
8 The button will flash orange while the system
reboots. The
MC200Air establishes a connection. When the
connection process is complete the
solid green.
If you decide later that you want to rename your MC200Air, repeat the above steps 1-4 and 8, without selecting
a Wi-Fi network.
Option 3 - System Setup Using an Ethernet Cable
Note: This process can take 10-15 minutes.
1 Disconnect the power cord from the back of the MC200Air for about 10 seconds. Turn off the internal Wi-Fi
system of your computer, if this is how it is normally connected to the internet.
2 Connect an Ethernet cable between the Ethernet port of the MC200Air and the Ethernet port on your
computer.
3 Reconnect the power cord to the MC200Air. Press the
10
MC200AIR Manual ML - g.indd 10
button will flash green while the
button lights
button.
7/22/12 3:54 PM