Boston Acoustics MC200Air Manual Del Propietário página 11

4 It will take 3-4 minutes for your computer and the MC200Air to connect. Be patient. Here's what will
happen: The button flashes orange while the system reboots, then turn solid green. The
fast-blink green while the connection to your computer is established. Do not go to step 5 until the
button lights solid green. This indicates your computer is ready to communicate with the MC200Air.
5 Launch a web browser such as
Internet Explorer®, Safari®, Firefox®,
etc. Enter http://169.254.1.1
in the address bar.
6 Click on "Profile Configuration".
7 Select the Wi-Fi network you want
to use from the Service Set ID drop
down list. Click Apply. If your network
requires a password you will need to
enter it. Enter the password carefully –
it is case sensitive.
Tip: If you want to rename the system
you may do this first. Enter a new
name in the "Digital Media Player
Name" box, then click "Apply".
8 An information box will be displayed - click OK.
9 Disconnect the Ethernet cable and power supply
from the MC200Air. Wait several seconds, then
reconnect the power supply.
10 Press the button. The system will restart and be ready to
go. The button will fast-blink green while the MC200Air
establishes a connection to your network. When the
connection process is complete the
Tip: If you decide later that you want to rename your MC200Air, repeat the above steps without selecting a
Wi-Fi network.
After set up, disconnect the Ethernet cable between the MC200Air and your computer. Remember to turn
back on the internal Wi-Fi system of your computer (if you normally use Wi-Fi).
MC200AIR Manual ML - g.indd 11
button lights solid green.
E
N
G
L
button will
I
S
H
11
7/22/12 3:54 PM