Boston Acoustics MC200Air Manual Del Propietário página 15

Updating the MC200Air Firmware
To update the firmware of the MC200Air, you must use a Macintosh computer or a PC running the Safari
web browser. Safari is the standard web browser for Macintosh computers. If you have a PC, you will need to
download Safari from the Apple web site.
Note: The computer should be connected to a power supply. Do not try to do the firmware upgrade using a
computer running on battery power.
Note: Do not remove power or turn off the MC200Air during the update process.
1 Download and save the latest firmware upgrade from www.bostonacoustics.com.
2 Turn on MC200Air. Wait until the
3 Play some music from iTunes on your computer to verify that it and MC200Air are on the same Wi-Fi
network.
4 Go back to Safari on your computer.
5 Click on Show All Book Marks Icon
6 Select BonJour from the list on the left side of the window.
7 Double click on the name of your MC200Air in the bookmarks list. This will bring up the Boston Acoustics
network setup page. Note: If your MC200Air does not appear on the list, be sure it is connected to the
same network.
8 Click on Firmware Update to bring up the firmware update page.
9 Chose the option Firmware Update from Network. Click OK
10 Follow the instruction to complete the firmware update
After the firmware update, the MC200Air should work normally. However, in some cases, it may be necessary to
disconnect and reconnect the power. It may also be necessary to setup the network connection again.
MC200AIR Manual ML - g.indd 15
and buttons stop blinking.
.
E
N
G
L
I
S
H
15
7/22/12 3:54 PM