Boston Acoustics MC200Air Manual Del Propietário página 13

Ocultar thumbs Ver también para MC200Air:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 31
Using DLNA
Because so many different manufacturers make DLNA capable devices, it is difficult to give specific information
on how to use the DLNA features. Please refer to the instructions for your device for specific information. In
general the process of playing a DLNA device through the MC200Air goes something like this:
Be sure that your Wi-Fi network is active, the DLNA device you want to connect is on and the MC200Air is on.
Open the DLNA control application on your device. Select "Share Media". From there, follow the menus to the
"settings" screen. Typically you have the option to play music from your wireless device, or to "push" music from
a computer to the MC200Air.
Notes and Tips
When the MC200Air is turned off it still may feel slightly warm. That's because some circuitry remains active
even when the MC200Air is off. This allows a remote command to turn on the MC200Air.
The MC200Air may automatically turn itself on and begin playing. If you start playing music from a source
device that is connected to your network via AirPlay, the MC200Air will "wake up" and begin playing.
After 30 minutes of inactivity, the MC200Air will go into a low power standby mode. If music play is restarted,
the MC200Air will resume playing. There may be a slight delay while the system comes out of standby mode.
If you have two or more MC200Air systems, you will want to give each a unique name to make it easy to select
the one you want to use. See the setup Option 2 (System Setup Using Wi-Fi) for details on how to customize
the names of your systems.
Wall Mounting the MC200Air
The MC200Air can be wall mounted using the
keyhole openings on the back of the system. Install
two M5 or equivalent screws in the wall . They must
15
be exactly 3
/
" (100mm) apart, and level with each
16
3
other. Leave about
/
" (5mm) of the screw shaft
16
exposed so the head of the screw can engage the
keyhole opening. Carefully position the MC200Air
keyhole openings over the screw head and set it in
place. Be sure the cabinet is firmly mounted on the
screw heads before you let go of the system.
MC200AIR Manual ML - g.indd 13
3
/
in
15
16
(100mm)
13
E
N
G
L
I
S
H
7/22/12 3:54 PM

Publicidad

Tabla de contenido
loading

Tabla de contenido