water to a boil and allow it to continue boiling
for approximately 10 minutes. Drain off the
water and place parts on a clean cloth to dry.
fOr QuIcKer cLeanIng
Medela offers Quick Clean
bags for daily kit disinfection and
QuickClean wipes for cleaning before
and after each pumping session.
Shells and backs can be put in the top
rack of a dishwasher or an autoclave.
Do not place foam inserts in a dishwasher,
Quick Clean Micro-Steam or autoclave.
Between uses durIng tHe day
If you are leaking, special care must be taken
to avoid the build up of dried breastmilk on
the shell parts and in the foam inserts. If the
foam inserts become saturated, separate
the shells, backs and inserts. The shells and
backs should be washed with a mild soap or
detergent in warm water, rinsed thoroughly
in cold water and dried. Squeeze the milk
out of the foam, then rinse them twice with
clean cold water. Dry them by squeezing
between a clean cloth or paper towel.
Hospital cleaning
for both Inverted Nipple and Sore Nipple Kits
SoftShells
The parts, except foam inserts, may be
autoclaved. Squeeze the milk out of the
foam, then rinse them twice with clean cold
water. Dry them by squeezing between a
clean cloth or paper towel. Additional foam
inserts may be ordered, Article #850.7002.
should be sterilized daily.
™
Micro-Steam
™
5
™