Daily Maintenance; Weekly Maintenance; Monthly Maintenance - Vulcan 650-4815 Manual De Instrucciones

can raise debris particles which can damage your eyes.
l After 2 weeks, tighten all nuts and bolts, including head bolts.
WARNING
Before any maintenance or adjustments to your air compressor,
!
always take the following safety precautions:
1. Disconnect electrical power.
2. Open the petcock to drain air tank of pressure.

DAILY MAINTENANCE

Before each use:
l Check the oil level
l Be sure all nuts and bolts are tight
l Check for any unusual noise or vibration
l After use: open the air tank drain cock to drain condensation from tank. This is
especially critical in cold conditions when condensation could freeze in the tank
and cause mechanical damage as well as rust.

WEEKLY MAINTENANCE

l Clean the air filter by twisting open the metal air filter cap. Remove the filter
element and clean it thoroughly with soap and water.

MONTHLY MAINTENANCE

l Inspect air system for leaks by applying soapy water to all joints.
l Tighten those joints if leakage is observed.
l Check that all nuts and bolts stay tight.
250 HOURS or 6 MONTHS (whichever comes first): OIL CHANGE
l After 250 hours of use, your compressor will require an oil change.
l Paint spraying operations or dusty environments may require you replace oil
more often
WARNING
Before removing the oil drain plug or the oil fill cap from your air
!
compressor, always take the following safety precautions:
Disconnect electrical power.
l
Open the petcock to drain air tank of pressure.
l
1. Remove the oil drain plug. Allow oil to drain completely.
2. Replace the oil drain plug (we recommend the use of a sealing compound or
tape to avoid leakage). Do not over-tighten.
MAINTENANCE
13