Cool Mode - Qlima P522 Instrucciones De Uso

G
DESCRIPTION OF THE DISPLAY SCREEN
Ideal for hot muggy weather when you need to cooling and dehumidify the room.
To set this mode correctly:
Three speeds are available:
The most suitable temperature for the room during the summer varies from 24°C
to 27°C(75°F to 81°F ). You are recommended, however, not to set a temperature
much below the outdoor temperature. The fan speed difference is more
noticeable when the appliance is under FAN mode but may not be noticeable
under COOL mode.
* means only the heat pump model have this function.
To set this mode correctly:
Three speeds are available:
4
54
Never turn the appliance off by unplugging from the mains. Always press
the button , then wait for a few minutes before unplugging. This
allows the appliance to perform a cycle of checks to verify operation.
Plug into the mains socket, then the appliance is standby. Press the
to make the appliance turn on. The last function active when it was turned
off will appear.

COOL MODE

• Press the M button a number of times until the
• Select the target temperature18°C-35°C(64 °F-90°F) by pressing the /\ or v
button until the corresponding value is displayed.
• Select the required fan speed by pressing the
Maximum speed: for maximum fan power
Medium speed: reduces noise levels but still maintains a good level of comfort
Low speed: for silent operation
HEAT MODE*
• Press the M button a number of times until the
• Select the target temperature 13"C-27°C(55 °F-81°F) by pressing the /\ orV
button until the corresponding value is displayed.
• Select the required fan speed by pressing the
Maximum speed: for maximum fan power
Medium speed: reduces noise levels but still maintains a good level of comfort
Low speed: for silent operation
• Water is removed from the air and collected in the tank.
• When the tank is full, the appliance shuts down and "
on the display. The tank cap must be extracted and emptied. Run off all
water left into a basin. When all the water has been drained, put the cap
back in place.
• When the tank has been emptied, the appliance starts up again.
button
symbol appears.
button.
symbol appears.
button.
" (full tank) appears