Cleaning The Air Filters - Qlima P522 Instrucciones De Uso

Fig. 3
Fig. 4
F
Programming start up
• Turn on the appliance, choose the mode you want, for example cool, 24°C, high
fan speed. Turn off the appliance.
• Press the button, the screen will display 1-24 hours, and the
symbol and symbol are flash together.(fig 3)
• Press several times until the corresponding time is displayed.Wait about 5 sec-
onds, the timer will be active, then only the
4).
• Press again the button or the
symbol will disappear from screen.
Programming shut down
• When the appliance is running, press the
and several symbols are flash together. (fig 5)
• Press several times until the corresponding time is displayed. Wait about 5 sec-
onds, the timer will be active. then only the
6)
• Press again the button or the
symbol will disappear from screen.
Fig. 5 Fig. 6
Replacing the Battery
To replace the battery, follow the steps below:
1 Use a screwdriver to remove the screw that secures the battery cover;
2 Push the latch to the right side and pull the battery cover out;
3 Replace the battery and slide the battery cover back into the remote;
4 Replace the screw that secures the battery Cover.
Screw
Battery
Remove
cover
latch
Battery
cover

CLEANING THE AIR FILTERS

To keep your appliance working efficiently, you should clean the filter every week of
operation.
The evaporator filter can take out like fig. 28.
The condenser filters are two pieces.
Step1: Take out one filter like fig. 29.
symbol is displayed on screen.(fig
button, the timer will be canceled, and the
button, the screen will display hours,
symbol is displayed on screen.(fig
button, the timer will be canceled, and the
Fig. 7
Push the latch to the
right side
Pull the cover out
Battery
(type: CR2025
symbol and
4
57