► Please read this document carefully before using the product and
observe the safety notices.
► Instruct the user in the safe use of the product.
► Please contact the manufacturer if you have questions about the
product or in case of problems.
► Report each serious incident in connection with the product, in particu
lar a worsening of the state of health, to the manufacturer and to the
relevant authority in your country.
► Please keep this document for your records.
1.1 Construction and Function
The 2Z500 or 2Z501 Outer Soles are mounted on the 1E90 Sprinter Pros
thetic Foot. The 2Z501 Outer Sole with spikes is used for running on an all-
weather running track while the 2Z500 Outer Sole without spikes is for all
other surfaces.
1.2 Combination Possibilities
Designation
Prosthetic foot
2 Intended use
2.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fittings.
2.2 Area of application
Approved for a body weight of up to 125 kg.
2.3 Environmental conditions
Allowable environmental conditions
Temperature range for use: -10 °C to +60°C
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, fresh water, salt water, acids
Dust, sand, highly hygroscopic particles (e.g. talcum)
2.4 Service life
The product is a wear part, which means it is subject to normal wear and
tear.
Reference Number
1E90 Sprinter
11