Adjusting The Height - Domo DO8150 Manual De Instrucciones

1
3
6. Place the lower tube on the base. Note the groove in the tube so that it corresponds to the tongue in
the base. Use the supplied screw and pinion to screw it into place on the underside of the base.
7. Place the upper tube on the other tube. These can be screwed into place using the supplied short
screw.
8. Place the fan head on top of this unit. Screw it into place using the supplied long screw.
6
USE
Put the plug in the socket. The button for the speed settings allows you to turn the
fan on and off. There are 3 speeds to choose from (1 - 2 - 3). To switch the appliance
off again, turn the button back to 0.
Oscillation
To allow the fan to oscillate, push in the oscillation button. To turn off the
oscillation again, press this button again. When it is switched on, it will alternately
turn to left and right to better spread the air.
Directing the air flow
To adjust the ventilation direction up or down, push the fan head up or down.

Adjusting the height

The height of the fan can be adjusted by removing the upper part of the tube.
www.domo-elektro.be
5
7
4 3 2
8
1
21
DO8150