GUTMANN SILLA Instrucciones De Montaje página 11

6. Drill four holes (Ø10 mm) and insert
the wall plugs.
7. Insert the stair bolts into the plugs
until only approx. 20 mm remains
visible and then screw the nuts onto
the bolts.
8. Thread the exhaust air hose and con-
necting line down from the ceiling.
The exhaust air hose should hang
approx. 25 cm down from the ceiling.
9. Push the installation flange with the
motor module over the exhaust air
hose and hang it on the stair bolts.
Align the motor module and tighten
the nuts.
10. Push the exhaust air hose over the
adapter and fix in place with the
hose clip, making sure there are no
kinks.
Then connect up the electrical con-
necting cable. If using an external
blower motor, connect up the con-
necting cable.
en
11