Maintenance; Service; Keep Machine Clean; Accessories - Delta RT-40 Manual De Instrucciones

kEEP MACHINE CLEAN

Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth.
NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.
Wear certified safety equipment for eye, hearing and respiratory protection while using compressed air.
FAILURE TO START
Should your machine fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet. Also,
check for blown fuses or open circuit breakers in the line.
LUBRICATION & RUST PROTECTION
Apply household floor paste wax to the machine table, extension table or other work surface weekly. Or use a commercially
available protective product designed for this purpose. Follow the manufacturer's instructions for use and safety.
To clean cast iron tables of rust, you will need the following materials: a sheet of medium Scotch-Brite
®
a can of WD-40 and a can of degreaser. Apply the WD-40 and polish the table surface with the Scotch-Brite pad. Degrease
the table, then apply the protective product as described above.
Since accessories other than those offered by delta have not been tested with this product, use of
such accessories could be hazardous. For safest operation, only delta recommended accessories should be used with
this product.
A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta
Authorized Service Stations. Please visit our Web Site www.deltaportercable.com for a catalog or for the name of your
nearest supplier.
To register your tool for warranty service visit our website at www.deltaportercable.com.
delta will repair or replace, at its expense and at its option, any new delta machine, machine part, or machine accessory which in normal
use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a delta factory service
center or authorized service station with proof of purchase of the product within two years and provides delta with reasonable opportunity
to verify the alleged defect by inspection. For all refurbished delta product, the warranty period is 180 days. delta may require that electric
motors be returned prepaid to a motor manufacturer's authorized station for inspection and repair or replacement. delta will not be responsible
for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone
other than an authorized delta service facility or representative. Under no circumstances will delta be liable for incidental or consequential
damages resulting from defective products. This warranty is delta's sole warranty and sets forth the customer's exclusive remedy, with respect
to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly
disclaimed by delta.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, see coun-
try specific warranty information contained in the packaging, call the local company or see website for warranty information.

MAINTENANCE

ACCESSORIES

WARRANTY

Two Year Limited New Product Warranty
26
Blending Hand Pad,
™