Charge The Batteries - DJI PHANTOM 4 RTK Guia De Inicio Rapido

4. Charge the Batteries

Fully charge the batteries before first-time use.
●
Ensure to connect the Intelligent Flight Batteries to the charging hub as shown in the figure above.
●
Ensure that the Mode Switch of the Intelligent Flight Battery charging hub is set to the Charging Mode position.
●
5. Prepare the Remote Controller
Strong Weak
Optimal Transmission Zone
6. Prepare for Takeoff
Remove the gimbal clamp
from the camera.
When using your Phantom 4 RTK for the first time, activate it using the DJI GS RTK app. Ensure that the
remote controller has access to the Internet.
Internet
OR
A A
Unfold
Power on the remote
controller and the aircraft.
Power Outlet
100 - 240 V
B
A
Try to keep the aircraft inside the optimal
transmission zone. If the signal is weak,
adjust the antennas or fly the aircraft closer.
DJI GS
RTK App
Enter the DJI GS RTK app.
B
5