- English -
- English -
Storage/Winterization
Remove the unit at temperatures below zero degrees centigrade. Thoroughly clean and check the unit for damage.
Store the unit immersed in water or filled with water in a frost-free place. Do not flood the power plug!.
Repair
A damaged unit cannot be repaired and must be put out of operation. Dispose of the unit in accordance with the
regulations.
Wearing parts
The impeller unit is a wear part and is excluded from the warranty.
Disposal
Do not dispose of this unit with domestic waste! Disable the unit beforehand by cutting off the cables. Further
information about the recycling of this product can be obtained from your local municipal authority.
Troubleshooting
Issue
Cause
The unit does
No mains voltage
not start
Rotor blocked
Insufficient
Regulator closed too far
fountain height
Filter housing or rotor soiled, hose blocked
Hose defective
Hose kinked
Rotor worn
Unit switches
Filter clogged
off after a short
Water temperature too high
running period
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
Solution
Check mains voltage
Clean
Clean
Clean
Replace
Straighten hose
Replace rotor
Clean
Maximum water temperature: +95° F (+35 °C)
5