Remotely Controllable Functions; Lamp; Switching On And Off The Lamp Via The Control Board; Colour Wheels - Futurelight Spotlite MH-860 Manual Del Usuario

Remotely controllable functions

Lamp

The MH-860 is to be operated with a OSRAM HSR 575/2 95 V/575 W GX-9,5 or PHILIPS MSR 575/2 95
V/575 W GX-9,5, MSD 575 95 V/575 W GX-9,5 lamp.
A relay inside of the MH-860 allows you to switch on and off the lamp via the Control Board on the top side
or via your controller without affecting the rest of the lighting.

Switching on and off the lamp via the Control Board

1. Switch on the MH-860 and wait until the fixture reset has finished.
2. Press the [Mode] key in order to access the main menu. Browse through the menu by pressing the [Up]
and
[Down] keys until the display shows "LAMP". Confirm by pressing [Enter] key.
3. Use the [Up] and [Down] keys to select "On" for switching on the lamp and "Off" for switch off the lamp
and press [Enter] to confirm or [Mode] to cancel.
Note :
It is also important to note that the discharge lamp is a cold restrike type, which means that it has to be cold
before re-striking. For this reason, you have to wait 5 minutes (max. speed of fan must be adjusted) after
having switched off the lamp before you can switch it back on again. If you try to switch on the lamp within 5
minutes after having switched it off, the MH-860 will store this information and automatically ignite the lamp
when the 5 minutes period has expired. The message "HEAt" will appear on the control board display at the
back side of the MH-860. If the ignition of the lamp is seven times unsuccessful, on the display will appear
"LA.Er", meaning that the lamp could be damaged or even missed, or there could be a failure on the ignitor
or ballast.

Colour wheels

The MH-860 has two colours wheels both with 10 color positions - 9 of these with dichroic colors and the last
one open. Colour-wheel 1 can be positioned between two adjacent colors in any position. It is also possible
to rotate colour-wheel 1 continuously at different speeds („Rainbow effect") in both directions. Hot and cold
colour temperature filters (3200 K and 6000 K) and the UV-filter are situated on colour wheel 2.
By color macro function it is possible to obtain 64 different colours in following order: white, pink, magenta,
red, orange, yellow, green, cyan, blue, UV

Static gobo wheel

This wheel has 9 metal gobos + open position, all gobos are interchangeable. The gobos have an outside
diameter of 27 mm and an image diameter of 23 mm. Gobo wheel rotation from slow to fast can be also
adjusted. Furthermore, it has the gobo-shake function.

Rotating gobo-wheel

The rotating gobo-wheel includes 3 metal gobos, 1 glass gobo and 2 multicolor dichroic gobos rotating in
both directions, indexable, rotating gobo wheel cont. rotation slow to fast. All gobos are interchangeable. The
gobos have an outside diameter of 27 mm and an image diameter of 23 mm.

3-facet rotating prism

3-facet prism rotating in both directions at different speeds. Control via 16 prism-gobo-macros.

Iris

Motorized iris for different beam diameters

Focus - multistep zoom

Motorized focus enables the beam to be focused anywhere on stage at different beam angles: 15°, 18°, 22°,
provided by the special multistep zoom (3 steps).

Focus

Motorized focus enables the beam to be focused anywhere on stage.

Dimmer / Shutter / Strobe

Smooth 0 - 100 % dimming is provided by the combined mechanical dimmer / shutter unit. This unit may also
be used for strobe-effects (1 - 10 flashes per second)
43