Running The Cleaning Programme - melitta PASSIONE Manual De Instrucciones

Ocultar thumbs Ver también para PASSIONE:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 243
7.4

Running the cleaning programme

This cleaning programme is used to remove residues and co ee oil residues
with the aid of fully automatic co ee maker cleaning agents.
To avoid damage to the appliance, we recommend running the cleaning
programme every 2 months or as requested by the appliance.
The cleaning programme takes approximately 10 minutes and should not
be interrupted.
CAUTION
Contact with fully automatic co ee maker cleaning agent may lead to
eye and skin irritation.
Observe the processing instructions on the packaging of the fully auto-
ƒ
matic co ee maker cleaning agent.
ATTENTION
The use of unsuitable fully automatic co ee maker cleaning agent can
damage the appliance.
Only use Melitta® PERFECT CLEAN cleaning tabs for fully automatic
ƒ
co ee makers.
Requirements: The appliance is switched o .
Buttons
Displays
Steps
1. Clean the brewing unit and the inte-
rior (see section 7.2 on page 82).
2. Switch on the appliance.
3. Fill the water tank.
4. Press the "Service" button and also the
"Coffee strength" button for longer
than 2 seconds.
»
Care and maintenance
The appliance indicates that:
the cleaning programme is
running
the rst programme stage is
reached
85

Publicidad

Tabla de contenido
loading

Tabla de contenido