English
6.1 Drinks distribution - hot water
After having positioned the appropriate container under the
hot water nozzle (10), distribution is made in two ways.
DOSED FUNCTION
Press one of the hot water distribution keys (13a, 13b or
13c). The corresponding led will light up, hot water will be
issued and will stop automatically upon completion.
The distribution may be interrupted at any time by pressing
the previously active key again (shown by the lighted led).
CONTINUOUS FUNCTION
Press the hot water distribution key (13c) and keep pressed
for approximately 3 seconds.
Hot water will be issued continuously until the hot water key
(13c) is pressed again to stop this function.
In continuous function the progrmmed dosed in the key is
not changed.
6.2 Drinks distribution - steam
Completely immerse the right (9) or left (20) steam nozzle
into the container with the liquid to be heated and push the
steam control lever (11 or 17) upwards.
Wait until the liquid has reached the desired temperature,
then lower the steam command lever to stop the issue of
steam.
Note: At the conclusion of each steam dispensing phase,
clean the inside of the steam nozzle as follows:
Turn the nozzle towards the cup tray and carefully
activate steam dispensing at least once.
13a
13b
13c
10
17
20
44
English
11
9