Programming The Coffee Measures - Faema E91 AMBASSADOR Manual Del Usuario

English

8.1 Programming the coffee measures

" Before programming the coffee dispensing push
buttons fill the filter holder with the correct serving
of ground coffee. Don't use coffee grouts for
programming servings."
Fit and tighten the filter holder (25) on the coffee dispenser
unit, positioning the cup (or cups) under the nozzle (or nozzles)
of the filter holder (25).
Press (and keep momentarily pressed) the coffee dispensing
push button (26, 27, 28 or 29) corresponding to the required
serving to be programmed.
When the amount of coffee in the cup reaches the required
level, release the coffee dispensing push button.
Repeat the above operations for the other coffee push
buttons.
Note: if you make a programming mistake, use a new dose
of ground coffee and repeat the operation.
8.2 Programming the hot water distribution keys
PROGRAMMING THE HOT WATER DISTRIBUTION KEYS
(13a, 13b or 13c)
To perform the programming of the coffee dose follow the
procedure herebelow:
1) Place a container by the hot water distribution nozzle (10).
2) Press one of the hot water distribution and keep it pressed
3) When the quantity of water in the container has reached the
desired level, release the key
26
27
28
13a
13b
13c
10
48
English
30
29
25