Zero; Tare In/Out; Lock/Unlock; Accumulate - Baxtran STV1000 Manual De Usuario

ENG
ES FR
>
For information about Auto-Zero, refer to Scale Configuration in Technical Manual.
Press or for 1s to power-off scale. Battery life percentage
then cut off power.

7-2. ZERO

Press or to zero. ZERO light on.
If load is in motion, or tared, or out of Manual-Zero Range,
>
For information about Manual-Zero Range, refer to Scale Configuration in Technical Manual.

7-3. TARE IN/OUT

In gross mode, press
If load is in motion, or negative, or out of Tare Range,
Tare will reduce the apparent overload range of scale. For example, if a 5000*2kg scale has a 1000kg container
as its tare, the scale will overload at a new weight of 4018kg (5000 – 1000 + additional 9 divisions).
In net mode, press

7-4. LOCK/UNLOCK

Press or to lock screen. HOLD light on.
Press or to unlock screen. HOLD light off.

7-5. ACCUMULATE

Press to accumulate current weight.
ACC
shows, indicating weight is accumulated. Scale uses displayed weight, so gross or net weight is added into
the same accumulator.
If load is in motion, or negative, or does not return to zero before,

7-6. VIEW

Press to enter View mode.
F1
Display flashes accumulated weight.
Press or to view high 5-digit or low 5-digit.
Press or to exit View mode.

7-7. DELETE LAST WEIGHT

Press to delete last accumulated weight.
dEL
shows, indicating last accumulated weight is deleted. Delete function only deletes the last weight.
If last accumulated weight has been deleted,
22
or to tare in. TARE light on.
or to tare out. TARE light off.
Err
bAt90
shows, off message
Err
shows.
Err
shows.
Err
shows.
shows.
Manual de usuario | Manuel d'usager | User's guide
High resolu on digital crane scale
oFF
shows, and
STV