Preliminary; During Use; After Use - HT HT53 Manual De Instrucciones

1.1. PRELIMINARY

This apparatus has been
designed for illuminance
measuring using.
Check if the battery is
installed correctly.
There is a switch inside
this luxmeter for the user
to select the full range
output level between 2V
and 0.2V. Please refer to
graph to locate the switch
ant to Chapter 5 for how
to open the luxmeter.
In this manual every output voltage is
referred to 2V full range output level. If
0.2V full range output level is chosen,
please consider every output voltage
value divided by 10.

1.2. DURING USE

Read the recommendation which follow
and instruction in this manual:
WARNING
No
warnings
instructions
damage the apparatus and/or
its component.
Use the probe only in the ranges
indicated in this manual.

1.3. AFTER USE

Once
completed, switch off the probe.
If the probe is not be used for a long
period, remove the battery.
compliance
the measurements
EN - 3
HT53 HT53/05
with
and/or
for use
2 V
Output Voltage
Select Switch
0.2V
9 V
BATTERY
the
the
may
are