Introduction; Safety Information - Minipa MFA-845 Manual De Instrucciones

1) INTRODUCTION

• An unit with two functions: Phase sequence verification and
opened or closed phase indication.
• Alligator Clips without metallic contact: Can easily involve the
control panel terminals to be tested.
• Highly trustful: Can verify an extensive range of 75V to 1000V
that supply the 3 phases. Sealed against dust, the project war-
ranty high insurance and performance.
• Functional project: Small, light and portable. Projected to facilitate
the operation.
• Safety project: It not expose metal parts. The safety character-
istics are completely incorporated, including a "push button" to
minimize the damage due negligence.
• Magnetic back cover to be able set the instrument to switchboard
to facilitate their measurements

2) SAFETY INFORMATION

• Read carefully the information of this Instructions Manual before
using the instrument.
• Never make measurements with the instrument in the following
cases: the sequence meter or test leads are defective; the test
leads or your hands are wet; after storage or packaging of the
instrument in abnormal conditions; or with the instrument open.
• When performing measurements, keep your hands on the iso-
lated part of the test leads and avoid being in contact with the
ground potential, in other words , keep your hands insulated
using, for example, shoes with rubber soles.
• Never exceed the measurements limits of the instrument.
11