Wall Mounting - VOLTWERK VS 3 Instrucciones De Servicio

4.2.2
Voltwerk VS 3, 4, 5
4 Transportation and assembly

Wall mounting

Property damage due to incorrect storage.
LED indicators are not flush-mounted and may break under
load.
| Store inverters on their sides or rear sides only.
Requirements
| Installation instructions have been followed.
Make sure that no devices that generate warm exhaust air
are installed above or below the inverter.
A lack of clearance between the devices may reduce
output.
Required tools and materials
| String inverter (included in the delivery)
| Wall bracket (included in the delivery)
| Drilling template (included in the delivery)
| Plugs and screws (included in the delivery)
| Suitable drill
| Suitable open-ended spanner
Fitting the inverter
1. Remove the inverter from its packaging. Take care to
ensure that:
| The device hood is packed separately.
Operating manual
25