Connecting The Solar Power System Cable - VOLTWERK VS 3 Instrucciones De Servicio

5 Installation
34
5.3

Connecting the solar power system cable

Requirements
| Check the polarity of the solar power system cable.
| Check the voltage of the solar power system cable.
| Solar power system cable:
| Cable section 1.5–10 mm
Contact sockets for 4 mm
| Cable diameter 5 to 8 mm
| Tin-plated cable
| Switch position of the DC switch disconnector at 0.
1
5.2: Switch position 0
| Switch position 0: there is no power to the power unit
for the string inverter.
Tools required
| Gripper with appropriate crimping die. Take care to ensure
that:
| Only use crimping die D made by Wieland (Article
number 05. 502. 2300. 0).
| Risk of damage from incorrect crimping die!
| Open-ended spanner (13 mm, 20 mm)
Operating manual
2
2
included in the delivery.
0
1
0
Voltwerk VS 3, 4, 5