vivitta vin 906 Manual De Instrucciones página 10

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Please read the following
Warning
instructions carefully before
installing the product.
1. only suitable if the approved vehicle has been
fitted with three-point safety belts that meet
ECE standard Nº 16 or equivalent.
2. Under no circumstances should the safety seat be
installed in the front seat of the car opposite the
direction of travel if the car is equipped with an
active airbag.
3. Do not use this child safety seat in passenger seats
equipped with airbags.
4. This child seat must be used wiTH the harness
system for children weighing between 0 kg and
18 kg.
5. This child seat may be used wiTHoUT the harness
system for children weighing between 15 kg and
36 kg.
6. Please read the instructions carefully, as incorrect
installation could result in serious injury. if any
injuries should occur as a result of incorrect
installation, the manufacturer will accept no
liability.
7. This child restraint system complies with the rules
of Regulation ECE 44/04 and can be installed
in most vehicles equipped with 3-point seat
belts aligned to ECE Regulation 16. Anyway, you
should always test the seat in your vehicle and
with children on board before buying it, to ensure
18
that this model meets all your needs. Under no
circumstances shall this seat be fitted only with a
2-point lap belt.
8. Please never use the safety seat without its cover
or without the harness protectors.
9. Fastening a child dressed in outerwear could
reduce the efficiency of the restraint system.
10. Make sure to protect the child safety seat from
direct sunlight as it could heat up and hurt the
child.
11. Child seats or harness accessories that are
damaged or have been used incorrectly must be
replaced.
12. Do not leave heavy objects inside the car, as these
may injure the child in the event of an accident.
13. Make sure that the buckle is correctly fastened
so that the child can be quickly freed in case of
emergency.
14.The safety seat's rigid and plastic elements should
be positioned and installed so that they cannot
be trapped by a moving seat or a door during
everyday use of the vehicle.
15. Do not disassemble, modify, or add any piece to
the child seat or harness, as this would seriously
affect its basic functioning and the safety that
the child seat provides.
16. The safety seat must remain installed in the
vehicle with the safety belt, even if the child is not
seated in the child seat. The child must never be
left unattended while seated in the safety seat,
not even outside the vehicle.
17. Keep the safety seat away from corrosive
products.
18. Do not use anchor points that are not listed in the
instruction manual and indicated on the seat.
19. The seat should be replaced after undergoing the
violent stresses associated with an accident.
20. The manufacturer guarantees the quality of
its products, but not the quality of second-
hand products or products belonging to other
companies.
21. instruction illustrations are for informational
purposes only. The child restraint system may
contain small differences compared to the
photographs or images in the instruction manual.
These variations do not affect its certification
under ECE Regulation R44/04.
1. overvieW
(1)
Headrest
(9)
Headrest
(2)
Belt guide
height
(groups 2
adjuster
and 3)
(10)
Shoulder
(3)
Shoulder
straps
protectors
(11)
Abdominal belt
(4)
Cushion
guide (groups
0/1/2/3)
(5)
Buckle latch
(12)
Base
(6)
Harness buckle
(13)
Harness
button
adjustment
(7)
button
Harness
buckle
(14)
Harness
adjustment belt
(8)
Crotch pad
(15)
Reclining lever
(16)
Diagonal
belt guide
(group 0)
(19)
Shoulder
pads strap
(17)
Harness
connector
height
regulation
slots
(11)
Abdominal belt
guide (groups
(18)
Harness
0/1/2/3)
strap
connector
19

Publicidad

Tabla de contenido
loading

Productos relacionados para vivitta vin 906

Tabla de contenido