Charging; Transporting - Stihl BGA 45 Manual De Instrucciones

Ocultar thumbs Ver también para BGA 45:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 41
4 Safety Precautions
► Operate the blower alone.
► Do not work above shoulder height.
► Watch out for obstacles.
► Stand on the ground while working and keep a good
balance. If it is necessary to work at heights: Use a lift
bucket or a safe platform.
► If you begin to feel tired: Take a break.
► Blow sweep with the wind.
■ Objects can be thrown through the air at high speed
during operation. Bystanders and animals may be injured
and damage to property may occur.
► Do not direct the air blast towards bystanders, animals
or objects.
■ If the behavior of the blower changes during operation or
feels unusual, it may no longer be in a safe condition. This
can result in serious injuries and damage to property.
► Stop work, remove the activation key and contact your
STIHL servicing dealer.
■ Blower vibrations may occur during operation.
► Wear gloves.
► Take regular breaks.
► If signs of circulation problems occur: Seek medical
advice.

4.10 Charging

WARNING
Contact with live components may occur for the following
reasons:
– Connecting cable is damaged.
– Plug is damaged.
– Wall outlet is not properly installed.
0458-719-9821-B
■ Contact with live components can result in an electric
shock. This can result in serious or fatal injuries.
► Check that the connecting cable and plug are not
damaged.
► Insert the plug in a properly installed wall outlet.
■ Overvoltage can occur in the charging cable if the line
voltage or frequency are incorrect during charging. The
charging cable may be damaged.
► Make sure the line voltage and frequency agree with the
data on the charging cable's rating label.
■ A damaged or defective charging cable may produce an
unusual smell or emit smoke during the charging process.
This may result in personal injuries and damage to
property.
► Disconnect the plug from the wall outlet.
■ The charging cable can overheat and cause a fire if heat
dissipation is inadequate. This can result in serious or
fatal injuries and damage to property.
► Do not cover the charging cable.
■ If several charging cables are connected to one wall
outlet, electric cables may be overloaded during the
charging process. The cords can overheat and cause a
fire. This can result in serious or fatal injuries and damage
to property.
► Connect the charging cable to a single wall outlet.
► Do not connect the charging cable to multiple sockets.

4.11 Transporting

WARNING
■ The blower can turn over or move while being transported.
This may result in personal injuries and damage to
property.
English
29

Publicidad

Tabla de contenido
loading

Tabla de contenido