Maintenance; Recycling; Warranty - SPARKY HeavyDuty BR2 10.8Li-C HD Instrucciones De Uso

Maintenance

WARNING: Always set the forward/reverse
switch (3) in central position before any work on the
change, transport, maintenance and storage.
may vibrate loose over time.
CLEANING
tilation slots clean.
Regularly check to see if any dust or foreign matter has
entered the grills near the motor and around the switch-
es. Use a soft brush to remove any accumulated dust.
Wear safety glasses to protect your eyes whilst cleaning.
If the body of the tool needs cleaning, wipe it with a soft
damp cloth. A mild detergent can be used.
WARNING: Never use alcohol, petrol or other
cleaning agent. Never use caustic agents to clean
plastic parts.
WARNING: Water must never come into con-
tact with the tool.
CHARGER CLEANING INSTRUCTIONS
WARNING: Disconnect the charger from the
AC outlet before cleaning.
Dirt and grease may be removed from the exterior of
the charger using a cloth or soft non-metallic brush.
Do not use water or any cleaning solutions.
IMPORTANT! To assure product safety and reliability,
repairs, maintenance and adjustment (including brush
inspection and replacement) should be performed by
ganisations, always using genuine replacement parts.

Recycling

The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Batteries, chargers, accessories and packaging shall be
submitted to extraction for utilization of secondary raw
materials.
For EU-countries only:
Do not dispose of the power tool into household
waste! According to the guidelines 2012/19/EC, power
tools, which are not usable, should be recycled.
10
EN
Batteries:
Do not dispose of the power tool or the bat-
type of batteries should be sorted for environ-
mental-friendly recycling or destroyed.
For EU-countries only:
Defective or worn out batteries must be recycled accord-
ing to the guidelines 2006/66/EC.

Warranty

-
The guarantee period for SPARKY power tools is deter-
mined in the guarantee card.
dling will be excluded from the guarantee.
defects in workmanship will be corrected free of charge
through replacement or repair.
The complaints for defective SPARKY power tools will
be recognized if the machine is sent back to the dealer
or is presented to the authorised warranty service centre
undismantled, in its initial condition.
-
Notes
Carefully read the entire Original Instructions before us-
ing this product.
tions without notice.
All
-
-