How To Use Smart Tens - I-Tech SMART TENS Manual Del Usuario

5. How to use SMART TENS.

Preliminary instructions.
Before start using SMART TENS clean the skin in the treatment zone; connect the
cables to the electrodes; place the electrodes on the skin (see electrodes postion at the
end of the manual); connect the cables to the outputs (CH1 and/or CH2) and switch on
SMART TENS.
Warning: make sure that SMART TENS is switched off before disconnecting the
electrodes at the end of the treatment.
Operating instructions (N.B. read the whole manual before using the equipment)
1. Switch on SMART TENS pressing ON/OFF button
2. Select TENS or EMS program using TENS/EMS button.
3. Confirm the program pressing P button.
4. Start the program selecting the channel (press 1 or 2 button) and then increase
intensity using
5. Increase the intensity for the selected channel till the personal tolerance limit
(stimulation comfort). If the intensity is too high or uncomfortable, decrease it with
button.
6. At the end of the treatment SMART TENS will return to the main menu, decreasing
the intensity to zero.
Stop the program: to stop the treatment press once the ON/OFF
resets and the channel output stops.
Key Lock
Key lock can be used to avoid accidental modifications to parameters during the
treatment. To active key lock follow this steps:

Select the parameter and start treatment as suggest above;

Keep pressed P button and simultaneously press TENS/EMS button: al the
buttons will be locked and the display will show key lock icon
To unlock the key lock function, keep pressed P button and then press once
TENS/EMS button: all the buttons will be unlocked and the icon on the display will
disappear.
I.A.C.E.R. S.r.l.
button.
.
31
button. The timer
.
MNPG45-02