I-Tech SMART TENS Manual Del Usuario página 42

2. Select EMS programs using TENS/EMS button (the display shows EMS icon);
3. Select PC1 program and confirm it pressing P button;
4. Keep pressed P button for 3 seconds: the timer icon on the lower right side will
start flashing;
5. Adjust therapy time using
6. Adjust frequency (flashing icon Hz on the lower left side) using
buttons and confirm pressing P button;
Adjust impulse width (flashing icon μs on the lower left side) using
7.
buttons and confirm pressing P button;
8. SMART TENS is now ready for the treatment with desired parameters. Press 1
and/or 2 button (the icon of selected channel will start flash) to chose the
channel and increase intensity pressing
9. Increase intensity using
stimulation). If the intensity is too high increase it using
10. At the end of the treatment SMART TENS will return to the main menu,
decreasing the intensity to zero.
Stop the program: to stop the treatment press once the ON/OFF
resets and the channel output stops.
Treatment programs for muscle strength.
Muscle Photo
On desidred
Tonification
muscle
On desired
Refirming
muscle
Electrodes on
Draining
muscles to be
(cellulite)
drained
On desired
Resistance
muscle
On desired
Basic strength
muscle
On desired
Fast stregth
muscle
Muscular On desired
recovery after muscle
training
On desired
muscle
Muscular trophis
recovery
WARNING: MODERATE INTENSITY DURING THE FIRST TWO WEEKS, INCREASING IN THE FOLLOWING WEEKS
I.A.C.E.R. S.r.l.
and buttons and confirm pressing P button;
button;
button till you reach the tollerance limit (confortable
Weekly training program
Day 1 Day 3
P03 P03
PC1
Time 20
min P04
50Hz
250μs
P04 P02 (Tens)
P03 P03
P02 P02+P04
P01 P01+P04
P04 P04
PC1
Time 10
min P04
35Hz
250μs
42
button;
button. The timer
Day 5 Day 7
P03 P04
PC1
Time 10min
P04
35Hz 250μs
P02
P04
(Tens)
P03 P04
P02+P0
P02
4
P01+P0
P01
4
P04 P04
PC1
Time 10min P04
35Hz 250μs
MNPG45-02
and
and
No. Of
weeks
6
5
6
6
5
4
2
5