Installation
Oven Assembly
CONVEYOR
1. Slide the conveyor belt supports in the guides
with the gear wheel on the drive motor side.
See Figure 4.
2. Install the conveyor belt assembly in the
guides with the gear wheel on the drive motor
side.
3. Install the drive chain on the motor. See
Figure 5
Figure 4
Figure 5
4. Install the conveyor belt as shown. See
Figure 7 through Figure 13.
NOTE: To reverse the direction of the drive motor
(if necessary), exchange A1 and A2. See
Figure 6.
Y OR BL
S2
L2 L1
S3
S1
SPEED
A1 A2 A3
CONTROL
4
W
AC
AC
V
GND
BK
DC MOTOR
W
Figure 6
Belt Top
Direction of
Conveyor Travel
Figure 7