Analyses And Problem Solving; Problems, Cause And Solutions; Limpieza - Skymsen PCI-21G Manual De Instrucciones

Figura - 03
05
06
07
01 – Boca
02 – Arandela de fibra
03 – Gusano
04 – Clavillo del Gusano
05 – Cuchilla
06 – Discos: 3mm, 5mm o 8mm
(opcional)

3.3 Limpieza

3.3.1 Desligue la maquina y desconéctela de la red eléctrica
3.3.2 Remueva el Volante Nº 07 (Fig.03) y todos los componentes
internos de la Boca.
3.3.3 Afloje la manija ubicada en la lateral de la maquina para remover la
Boca Nº01 (Fig.03).
3.3.4 Lave todos los componentes con agua caliente y jabón neutro.
3.3.5 Para ensamblar la Boca, repita la secuencia arriba de manera
inversa.
IMPORTANTE
No guarde la Boca con carne en su interior.
20
5 Analysis and Problems Solving
5.1 Problem, causes and solutions
01
The Meat Grinders were designed to operate with the need of minimum
maintenance but the natural wearing caused by longer use of the equipment may
02
occasionally cause some malfunctions.
If such problem occurs with your Meat Grinder refer to Table 02 in which the
03
most common situations are listed with recommended solutions.
04
* Service life – 2 years for regular work shift
PROBLEMS
* The processed meat comes
out smashed.
* The machine stops during
operation.
* Burn smell and/or smoke.
* The machine starts but Head's
internal components take some
time to start.
* Oil leaking gear box.
Table - 02
CAUSES SOLUTIONS
* One of the Head's internal * C h e c k t h e c o r r e c t
assembling order according to
components is missing or they
picture-03 .
are assmbled incorrectly.
* Consult item 5.2.1 in this
* Lack of power. * Check if machine is
plugged in and if there is
power at power supply
* Problem in the internal or
source.
external electric circuit of the
* Call technical assistence.
machine.
* Worn uot or broken gears.
* Call technical assistence.
* Motor or other electrical pert
* Call technical assistence.
with problem.
* Damaged motor capacitor .
* Call technical assistence.
* Assemble head's internal
* Head's inetrnal components
c o m p o n e n t s c o r r e c t l y
out of place.
according to picture-03.
* Gears misaligned.
* Call technical assistence.
* Damaged seal.
* Call technical assistence.
13