Safety Information; Safe Machine Operation; Safety In Engine Operation - ENAR ZEN SERIE Manual De Instrucciones

Bandejas vibrantes
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2

SAFETY INFORMATION

2.1 SAFE MACHINE OPERATION

!
en

2.2 SAFETY IN ENGINE OPERATION

!
4
ZEN / ZEN-E
Improper use or maintenance of the equipment can generate danger situations. Read and
assimilate the instructions of this section before commencing work with this machine. The
equipment operator must be responsible for knowing how to work safely with the equipment. If
he has doubts, he should request information from people familiar with the machine or contact
ENARCO.
The engine heats up a lot during operation, let it cool down before touching it.
Never leave the machine running unattended.
The equipment must not be used without the adequate belt-cover protection. Always verify
that this is not missing and is in good conditions.
The operator must use protective clothing and hearing protection.
Prevent unauthorised personnel from accessing the work area.
Make sure that the operator knows how to disconnect the machine before starting the engine
up in case he finds difficulties.
Stop the machine before transporting it.
Do not try to lift the equipment without help. Request help or use an elevating mechanism,
using the hoist handle integrated in the plate cage.
Do not use the equipment if it is not in good physical conditions.
Store the equipment appropriately in a clean dry place when it is not in use.
As the fuels are highly inflammable, they are especially dangerous. Their improper use may
cause serious personal and material damage. ALWAYS comply with the following safety rules:
Never use the equipment inside a building or closed areas if there is not adequate ventilation.
Otherwise, the operator may become intoxicated by the carbon monoxide and lose
consciousness, which may even lead to death.
Before filling the fuel tank, stop the engine and leave it to cool for a few minutes.
Do not smoke whilst working with the machine or when filling it up with fuel.
Do not fill the tank up close to an open flame. Do so in a well-ventilated area.
If, when filling up with fuel, fuel is spilt, use sand to soak it up. Change clothes if fuel is spilt on
them.
Make sure that the fuel tank is closed properly after filling it up.
Check that the fuel pipes and tank have no cracks or leaks.
VIBRATING PLATES

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Zen-e serieMx-zen-1301

Tabla de contenido