Safety In Service; Transfers - ENAR ZEN SERIE Manual De Instrucciones

2.3 SAFETY IN SERVICE








2.4 TRANSFERS

VIBRATING PLATES
Do not clean or inspect the equipment in operation.
Do not start the engine with the cylinder flooded and after taken out the spark plug in petrol
engines.
Do not check if the spark plug gives off sparks if the cylinder is flooded with petrol or there are
petrol fumes.
Do not use solvents or fuels to clean the equipment, above all in closed areas.
Keep the area close to the silencer free from inflammable materials.
Before carrying out servicing operations on equipment with petrol engines, remove the spark
plug to prevent an unwanted start-up of the engine.
ZEN / ZEN-E
en
5