11.4
Electric connection to the outdoor unit
a
WARNING!
Danger of breakdowns or malfunction.
• If the fuse on the PC board is blown please
change it with type T. 25A/250V.
Fig. 11.2
Electric connection to the outdoor unit.
• Remove the protective covering in front of the electrical
connections in the outdoor unit.
• Loosen the screws in the cable retainer and fully insert the
cable ensuring the cable sheath extends past the cable
retainer before tightening the screws to clamp the cable.
VAM 6 MWN-I_EN - 09/14 - Vaillant
a
WARNING!
Danger of malfunction and breakdowns resul-
ting from water penetration.
• Always terminate the interconnecting cable from
below the cable entry to avoid water penetration
into the terminal box.
WARNING!
a
• Danger of malfunction and breakdowns resul-
ting from short-circuits.
• Check the cable retainer is sufficiently tight to avoid undue
strain on the connections.
• Check that the cables are correctly secured and
connected.
• Replace the protective wiring cover.
INSTALLATION
EN
17