Resident - Direct Commands Using The House Telephone; Resident - Direct Commands Using A Forwarded Telephone - LiftMaster EL1SS Manual De Instalación Y Configuración

INTRODUCTION

RESIDENT - DIRECT COMMANDS USING THE HOUSE TELEPHONE

PROGRAM DESCRIPTION OF FUNCTION OR SETTING
NUMBER
**04
ENABLE PARTY (LATCHED) MODE - RELAY 1
Party Mode will latch the relay and keep the entry device open to allow guests access to property .
To disengage party mode: Enter "*9" into the local telephone .
**05
DISABLE PARTY (LATCHED) MODE - RELAY 2
To disengage party mode: Enter "*5" into the local telephone .
*5 ACTIVATES RELAY 2
*9
ACTIVATES RELAY 1
**11
ENABLE "DO NOT DISTURB" MODE
This mode disables calls from the system to the house or forwarded telephone .
Factory Setting: Disabled
**12 DISABLE "DO NOT DISTURB" MODE

RESIDENT - DIRECT COMMANDS USING A FORWARDED TELEPHONE

PROGRAM DESCRIPTION OF FUNCTION OR SETTING
NUMBER
0 By entering
extends talk time) .
*5 ACTIVATES RELAY 2
INTRODUCTION
*9
ACTIVATES RELAY 1
CALL WAITING (FOR LANDLINES)
Press "Flash" once to answer guest, press again to return to outside call on Telco line, if
pressed . If *9
INSTALLATION
0 the audio is initiated for the resident to have a phone conversation with the visitor (also
INSTALLATION
(relay 1) or *5 (relay 2) is pressed, the EL1SS will automatically return to the Telco line .
TEST
TEST
17
SET UP
PROGRAMMING
STEPS
**04
**05
**11
**12
PROGRAMMING
STEPS
SET UP
*9 or *5 is not
*5
*9
0
*5
*9