Introduction; Supplied Accessories; Important Safety Information; Place The Avr - Harman JBL AVR 101IN Manual Del Propietário

AVR

Introduction

Thank you for choosing this JBL product!
For more than fifty years, the JBL mission has been to share a passion for music and
entertainment, using leading-edge technology to achieve premium performance. Sidney
Harman and Bernard Kardon invented the receiver, a single component designed to
simplify home entertainment without compromising performance. Over the years, JBL
products have become easier to use, while offering more features and sounding better
than ever.
The AVR 101IN 5.1-channel digital audio/video receivers (AVRs) continue this tradition
with some of the most advanced audio and video processing capabilities yet, and a
wealth of listening and viewing options.
To obtain the maximum enjoyment from your new AVR, please read this manual and refer
back to it as you become more familiar with its features and their operation.
If you have any questions about this product, its installation or its operation,
please contact your JBL retailer or custom installer, or visit the Web site at
www.jbl.com.

Supplied Accessories

The following accessory items are supplied with your AVR. If any of these items are
missing, please contact your JBL dealer or JBL customer service at www.jbl.com.
• System remote control
• AM loop antenna
• FM wire antenna
• Two AAA batteries
• AC power cord
Introduction, Supplied Accessories,
Important Safety Information and Place the AVR

IMPORTANT SAFETY INFORMATION

Verify Line Voltage Before Use
The AVR 101IN has been designed for use with 220 – 240-volt AC. Connection to a
line voltage other than that for which your receiver is intended can create a safety
and fire hazard and may damage the unit. If you have any questions about the voltage
requirements for your specific model, or about the line voltage in your area, contact your
selling dealer before plugging the unit into a wall outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord supplied with your unit. We do not
recommend that extension cords be used with this product. As with all electrical devices,
do not run power cords under rugs or carpets, or place heavy objects on them. Damaged
power cords should be replaced immediately by an authorized service center with a cord
meeting factory specifications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet, always pull the plug; never
pull the cord. If you do not intend to use your AVR for any considerable length of time,
disconnect the plug from the AC outlet.
Do Not Open the Cabinet
There are no user-serviceable components inside this product. Opening the cabinet may
present a shock hazard, and any modification to the product will void your warranty.
If water or any metal object such as a paper clip, wire or staple accidentally falls inside
the unit, disconnect it from the AC power source immediately, and consult an authorized
service center.

Place the AVR

• Place the AVR on a firm and level surface. Be certain that the surface and any
mounting hardware can support the AVR's weight.
• Provide proper space above and below the AVR for ventilation. Recommended
clearance distances are 30cm above the unit, 30cm behind the unit and 30cm on
each side of the unit.
• If you install the AVR in a cabinet or other enclosed area, provide cooling air within
the cabinet. Under some circumstances, a fan may be required.
• Do not obstruct the ventilation slots on the top of the AVR or place objects directly
over them.
• Do not place the AVR directly on a carpeted surface.
• Do not place the AVR in moist or humid locations, in extremely hot or cold locations,
in areas near heaters or heat registers, or in direct sunlight.
3