Alarm Functions - TFA Dostmann MOODLIGHT Instrucciones De Uso

TFA_No. 60.2023_Anleitung_05_20 20.05.2020
MOODLIGHT – Light alarm clock with nature sounds and colour changing mood light

7.2 Alarm functions

• This alarm clock provides a light alarm (wake-up light) and an audible alarm. Both alarms can be set for the same time or for different times.
E.g.: The light alarm is set to 06:50 and the audible alarm to 07:00. At 06:50 the white light goes on and it gets brighter gradually; at 07:00, the
audible alarm sound rings.
7.2.1 Light alarm (wake-up light)
• Press the LIGHT ALARM button in normal mode to enter the light alarm mode.
• LIGHT ALM and 6:30 (default), or the last set alarm time, appear on the display.
• Press and hold the LIGHT ALARM button.
• The light alarm symbol will appear and the hour digit will be flashing.
• Press the + or – button to set the hours.
• Confirm with LIGHT ALARM button.
• Set the minutes in the same way.
• Confirm the setting with the LIGHT ALARM button and return to normal mode.
• The alarm is activated.
• When the set alarm time is reached, the simulated sunrise begins with a light which becomes gradually brighter (10 stages in 5 minutes). Waking
up naturally with light has a positive effect on energy hormones.
• If the light alarm is not stopped manually, the wake up light automatically turns off after another five minutes and will be reactivated at the same
set time in the following day. The light alarm symbol remains on the display.
• Press any button to turn off the light alarm or press the SNOOZE/LIGHT sensor button to activate the snooze function.
• SNOOZE appears and the light alarm will be interrupted for the set time.
• The time display counts down the seconds.
• Press any button to turn off the snooze function.
7.2.2 Sound alarm
• Press the ALARM button in normal mode to enter the alarm mode.
• SOUND ALM and 7:30 (default) or the last set alarm time appear on the display.
• Press and hold the ALARM button.
• The alarm symbol will appear and the hour digit will be flashing.
• Press the + or – button to set the hours.
• Confirm with ALARM button.
• Set the minutes in the same way.
• Confirm the setting with the ALARM button.
• BEEP (default) appears on the display.
• Press the + or – button to select the alarm sound. 6 different alarm sounds are available (BEEP, RIVER, W-NOISE, THUNDER, BACKWOODS,
OCEAN)
• The mark in the upper display shows which alarm sound you have selected (BEEP without marking).
• Confirm the setting with the ALARM button and return to normal mode.
• The setting is saved.
• The alarm is activated.
16
10:40 Uhr Seite 9
MOODLIGHT – Light alarm clock with nature sounds and colour changing mood light
• When the set alarm time is reached, the alarm clock will wake you up with the selected settings.
• If the alarm is not stopped manually, the increasing alarm tone automatically turns off after five minutes and will be reactivated at the same set
time in the following day. The alarm symbol remains on the display .
• Press any button to turn off the alarm sound or press the SNOOZE/LIGHT sensor button to activate the snooze function.
• SNOOZE appears and the alarm will be interrupted for the set time.
• The time display counts down the seconds.
• Press any button to turn off the snooze function.
7.2.3 Activate/deactivate alarm
• Press the LIGHT ALARM button or the ALARM button in the respective alarm mode, to activate or deactivate the alarm function. The respective
symbol will appear or disappear on the display.
7.3 Nature sounds
7.3.1 Play mode
• Press the SOUND button in normal mode to enter the play mode.
• RIVER (default) or the last set sound is heard.
• Press the SELECT button to select the sound. 5 different sounds are available (RIVER, W-NOISE, THUNDER, BACKWOODS, OCEAN)
• Press + or – button to adjust the respective volume (10 levels).
• The setting is saved.
• Press the SOUND button again to exit the play mode.
7.3.2 Sleep mode
• This mode allows a gentle fall asleep with calming nature sounds.
• Press the SOUND button in normal mode to enter the play mode.
• RIVER (default) or the last set sound is heard.
• You can now select the sound and adjust the volume (as described above).
• Press the TIMER button.
• 15 minutes (default) or the last sleep time flashes.
• Press the TIMER button to set the desired time duration - 15 minutes at a time (15 to 90 minutes).
• The time display counts down the seconds.
• In TIMER mode, you can press the TIMER button at any time to adjust the sleep time or turn off the timer.
• Press the SOUND button again to exit the play mode.
• After time has expired, the sound will switch off automatically.
7.3.3 NAP timer
• Press and hold the NAP button in normal mode for three seconds, to enter the setting mode.
• NAP and 10 minutes (default) or the last nap time flashes.
• Press the + or – button to set the desired time duration – it adds 5 minutes at a time (5 to 120 minutes).
• Confirm the setting with the NAP button.
17